Atmel Linux kernel driver "extras" for CardBus and PCI wireless devices (not USB)
for Puppy Linux v2 with kernel 2.6.16.7
from www.thekelleys.org.uk/atmel
compiled May 2006.

This package contains the necessary firmware and utilities for the standard Atmel drivers already in Puppy 2.


INSTRUCTIONS  (this README is found in /root/my-applications)

## load the driver
modprobe atmel_cs  # or atmel_pci
## if no error messages, this should create a network interface, eth0 (or eth1)
ifconfig eth0 up  #(sometimes necessary)
## it should now be possible to use WAG (Wireless Access Gadget) to connect to a wireless network
## or continue to set up the wireless network manually -
iwconfig eth0 essid MY_ESSID key 1234567890 mode managed
## for automatic IP
## first remove stale dhcpcd file if it exists
rm /etc/dhcpc/*.pid
dhcpcd -t 30 -h puppypc -d eth0
## or for static IP
## modify /etc/resolv.conf to include your nameservers
#ifconfig eth0 192.168.0.xx broadcast 192.168.0.255 netmask 255.255.255.0
#route add default gw 192.168.0.1 eth0   # or whatever your router's IP is

A script is provided with these commands; /root/my-applications/bin/atmel-connect
Just modify the script to include your wireless settings.